TREMproof 201/60 is a high-solids, solvent curing modified polyurethane waterproofing membrane that can be applied primer-less to most concrete applications.
TREMproof 250GC is a rapid curing, high solids, low VOC, moisture cure modified polyurethane waterproofing membrane that can be applied to “Green” (24 hour old) concrete.
TREMproof 260 is a polymer-enhanced, single component, fluid-applied, bitumen emulsion, waterproofing membrane.
TREMproof 90 is a flexible, fast drying, low odour waterproofing membrane with fibre reinforcement for increased wet film thickness.
TREMproof P85 is a 100% solids, spray applied hybrid polyurea waterproofing membrane that allows for rapid installation, and assists with accelerated construction schedules.
Vulkem 346 is a UV stable, single component, polyurethane top coat. It is suitable for use with the Vulkem range of polyurethane base coats.
Vulkem 350R is a roll-able grade, low VOC, polyurethane waterproofing membrane.
Vulkem 350SL is a self leveling grade, low VOC, polyurethane waterproofing membrane.
Vulkem 351 is a UV stable, Low VOC, single component, polyurethane top coat.
Vulkem 360 is a low VOC, two component, water catalysed, polyurethane waterproofing membrane.
Vulkem 951NF is a UV stable, low VOC, two component, polyurethane top coat.
Vulkem H2 Plus is a single component, rapid cure, modified acrylic waterproofing membrane, incorporating micro fibres to increase strength and wet film thickness.
Vulkem MPU is a solvent based, single component, Class III polyurethane waterproofing membrane designed specifically for internal wet areas.
Vulkem NEM is a single component, moisture curing, high tensile strength and tough curing polyurethane membrane.
Vulkem NEM Plus is an Australian made single component, moisture curing, high tensile strength and tough curing polyurethane membrane.
