Anti-Root Additive for TREMproof 250GC and TREMproof 201/60.
75mm and 100mm wide, solvent resistant brushes for use in conjunction with Tremco membranes and coatings.
Open Cell polyethylene backing rod for use in conjunction with Tremco sealants and membranes.
Paraseal Paramastic is a sodium bentonite filled, bitumen based mastic for use with Paraseal waterproofing membranes.
Paraseal Paraterm bar is an aluminium alloy especially formulated to exhibit excellent holding power. The high strength assures bowless installation when installed per the pre-drilled holes.
Paraseal Permanent Seam Tape is a 1.5 mm thick, rubberized SBS bitumen membrane laminated to a polyethylene reinforcing film.
Saltwater Paragranular is a premium, high swelling, hydrophilic, granular, sodium bentonite. When in the presence of water, Saltwater Paragranular reacts and forms an impervious waterproof gel.
100% stitch-bonded, polyester reinforcing fabric, providing good elongation movement of the accompanying membrane for an overall excellent resistance to thermal stresses.
Pre-fabricated plastic paver/pedestal support specifically designed for the placement of pre-fabricated paver slabs of concrete, autoclaved compressed cement sheets, etc, on roofs or podium decks.
Adjustable paving support for pedestrian accessible roofs. Polypad 2.0 with integrated dumber and 1 extension collar.
230mm wide, solvent resistant 20mm nap Roller Sleeve and threaded handle 230mm wide Roller Frame for use in conjunction with Tremco membranes and coatings.
Tremco Pressure Seal is a aluminium K-Bar pressure bar for use with termination of TREMproof Torch on membranes in compliance with AS 4654.2 – External Above Grade Waterproofing requirements.
Xylene solvent used in conjunction with Tremco polyurethane sealants and membranes.
TREMcoat EPA is a two-component, versatile epoxy paste structural adhesive and void filler.
An SBS-modified bitumen, torch applied, elastomeric joint waterproofing material, for use in conjunction with Tremco’s TREMproof Torch 3000, 4000, 4000M, or Anti-root offering.
TREMproof Torch Slate Flakes are aggregate mineral chips to cover up lap lines and bitumen “bleed” in the TREMproof 4000M, mineral finish.
TREMproof Torch Vent & Cap is a PVC vent and cap used in conjunction with TREMproof Torch Fleece to provide a ventilated, torch applied waterproof roof system.
TREMseal Bandage is a TPE flexible sealing tape, is thin and extra-tough elastic strip with considerable longitudinal and lateral extension.